Actix Analyzer v5.5 391.258 x64 2019/03 release the latest version!

Actix Analyzer v5.5 391.258 x64 2019/03 release the latest version!
 Actix 5.5 391.258 new version support 5 G ,5cc .volte ,CA Nemo , tems ., dingli , probe ,..ect logfile analysis ,Full license,support xzp G8142/8142 , S7 , S8 ... ect log analyze,support win 10 / 8 / 7 systems.

ANALYZER
The industry leading desktop solution, Analyzer provides advanced drive test survey analytics. It supports network optimization,
network acceptance and validation, and is used in 2G, 3G, LTE and VoLTE rollouts.
Global leader
In use at over 300 operators Analyzer is the most widely used tool in its class.
Multi-vendor & multi-technology
Analyzer supports all drive test equipment available. This unique position means engineers can analyze their data wherever it
comes from. The data is normalized, so the same analysis works across different data sources.
Automated troubleshooting
Analyzer is the most reliable and trusted tool on the market for helping operators troubleshoot problems. It automates
identification, analysis and diagnosis of common issues and provides detailed ad hoc analysis capabilities of the uncommon ones.
Flexibility of KPI reporting
Defines and measures any KPI. Quickly creates validation and acceptance reports that establish coverage, quality and capacity for acceptance of network improvements.
Data services analysis
Enables session analysis for finding the cause of service performance problems and understanding when and where network features were available and used. Provides full IP layer decode and session analysis for building tailored KPIs.
Indoor analysis
Enables validation of the indoor network and its interaction with the macro network. Geo-references RF measurements and events and visualizes venue layout. Generates KPI reports to evaluate the readiness of the in-building network ahead of launch
Device and chipset validation
The world`s leading chipset and handset manufacturers use Analyzer to validate the performance of new devices against a reference device. Also to automate the creation of complex KPI reports and investigate performance issues in detail.

download links:
 https://mega.nz/#!lZQzFQTB!U2iRKrzncnTZarWXNJAwj7WppsIqbXXF8NVqunI7Fz0

Zemax OpticStudio 19.4 for win7/8/10 64bit premium full!

Zemax Opticstudio 17.0/17.5/18.9/19.4 2017/2018/2019/2020/2021 with SN  **welcome to trial license**

How to get zemax trail license from me? read carefully.note!

• 1.download files from below links.
• 2.read install manual.
• 3.run hardware getid,(sometimes,you should disable antivirus,otherwise
•    forget it,delete!)
• 4.send hardware id to me.
• 5.i will send a file name serial.txt to you.or serial number,then you
•    need save to serial.txt for your PC.
• 6.copy patch&update files to install directory.
• 7.enjoy it.contact me.

Download links:

Zemax R13

https://mega.nz/folder/pQxnlS5T#rt7EygpnTLNsLMWe8z8fJg

Zemax 18.9 SN
https://drive.google.com/drive/folders/18lRTQDhP36z3zqqDfvSQ2w49JPxVNr8x?usp=sharing

Zemax 19.4 SN
https://drive.google.com/drive/folders/1PJcVzD0d9hK38HeTtkGo__iDI7u3ICqj?usp=sharing

Zemax opticStudio 21.3 dongle
https://drive.google.com/drive/folders/1vk70pRtWibhQNVFZfpfqnjJHvpryztNF?usp=sharing

 

IMPORTANT NOTICE:

     You are installing software developed by K.L and free sharing for the purpose of learning exchange. Original software copyright of the company and the production unit. All organizations and individuals are prohibited from publicly propagating, copying, editing, uploading and using in any form.
      If you are not the intended recipient, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication or any action taken or omitted to be taken in reliance upon this software is prohibited and may be unlawful. Please delete within 24 hours. If you like, buy the original!

Zemax OpticStudio 19.4 for win7/8/10 64bit premium full!

Zemax Opticstudio 17.0/17.5/18.9/19.4 2017/2018/2019/2020/2021 with SN  **welcome to trial license**

How to get zemax trail license from me? read carefully.note!

• 1.download files from below links.
• 2.read install manual.
• 3.run hardware getid,(sometimes,you should disable antivirus,otherwise
•    forget it,delete!)
• 4.send hardware id to me.
• 5.i will send a file name serial.txt to you.or serial number,then you
•    need save to serial.txt for your PC.
• 6.copy patch&update files to install directory.
• 7.enjoy it.contact me.

Download links:

Zemax R13

https://mega.nz/folder/pQxnlS5T#rt7EygpnTLNsLMWe8z8fJg

Zemax 18.9 SN
https://drive.google.com/drive/folders/18lRTQDhP36z3zqqDfvSQ2w49JPxVNr8x?usp=sharing

Zemax 19.4 SN
https://drive.google.com/drive/folders/1PJcVzD0d9hK38HeTtkGo__iDI7u3ICqj?usp=sharing

Zemax opticStudio 21.3 dongle
https://drive.google.com/drive/folders/1vk70pRtWibhQNVFZfpfqnjJHvpryztNF?usp=sharing

 

IMPORTANT NOTICE:

     You are installing software developed by K.L and free sharing for the purpose of learning exchange. Original software copyright of the company and the production unit. All organizations and individuals are prohibited from publicly propagating, copying, editing, uploading and using in any form.
      If you are not the intended recipient, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication or any action taken or omitted to be taken in reliance upon this software is prohibited and may be unlawful. Please delete within 24 hours. If you like, buy the original!

Zemax OpticStudio 19.4 for win7/8/10 64bit premium full!

Zemax Opticstudio 17.0/17.5/18.9/19.4 2017/2018/2019/2020/2021 with SN  **welcome to trial license**

How to get zemax trail license from me? read carefully.note!

• 1.download files from below links.
• 2.read install manual.
• 3.run hardware getid,(sometimes,you should disable antivirus,otherwise
•    forget it,delete!)
• 4.send hardware id to me.
• 5.i will send a file name serial.txt to you.or serial number,then you
•    need save to serial.txt for your PC.
• 6.copy patch&update files to install directory.
• 7.enjoy it.contact me.

Download links:

Zemax R13

https://mega.nz/folder/pQxnlS5T#rt7EygpnTLNsLMWe8z8fJg

Zemax 18.9 SN
https://drive.google.com/drive/folders/18lRTQDhP36z3zqqDfvSQ2w49JPxVNr8x?usp=sharing

Zemax 19.4 SN
https://drive.google.com/drive/folders/1PJcVzD0d9hK38HeTtkGo__iDI7u3ICqj?usp=sharing

Zemax opticStudio 21.3 dongle
https://drive.google.com/drive/folders/1vk70pRtWibhQNVFZfpfqnjJHvpryztNF?usp=sharing

 

IMPORTANT NOTICE:

     You are installing software developed by K.L and free sharing for the purpose of learning exchange. Original software copyright of the company and the production unit. All organizations and individuals are prohibited from publicly propagating, copying, editing, uploading and using in any form.
      If you are not the intended recipient, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication or any action taken or omitted to be taken in reliance upon this software is prohibited and may be unlawful. Please delete within 24 hours. If you like, buy the original!

Sprut-Cam11.5 for win7/8/10 X86X64 2018 release! welcome to trial version have test it first!!

Sprut-Cam11.5 for win7/8/10 X86X64 2018 release

Welcome to few days license file to test
Pls contact me: 

Email:globalrobotsolutions#gmail.com  replace # to @ 

Skype:yeehlee

Download links:
https://mega.nz/#F!eJwxFCLR!y1BiXdzAo8dvpE4TDz39sQ

 

 

SprutCAM has 5 axis continuous strategies, which enables to create
 CLData for any type of multiaxis machines. The CLData is created
taking into consideration the machine scheme, which permits to avoid
collisions during the machining. The CLData is created taking into
consideration the transformation of the co-ordinates of the machining.

We're extremely excited to announce the official release of new version
SprutCAM 11. It had presented March 20th - 21th in Frankfurt and available right
This is a major version release with hundreds of new features, enhancements,
 and improvements: 5D Surfacing operation, Helical operation, Rotary
roughing operation, Pencil operation, Corners cleanup operation, Toolholder
collision avoidance, Dynamic approach / return move editing and more!

Turn-Mill module of SprutCAM includes powerful turn-milling methods to
 program multi axial machining with support Multi-tasking Turn-Milling
centers with live tooling, include CNC Swiss-Type Lathe. Easy interface
 and features of the lathe module the ability to program roughing,
 finishing, grooving, threading and part-off machining operations.
Control of all the machine mechanisms

SprutCAM permits to create NC programs for any types of turn mill machines
without a limitation on the number of axes and machine’s executive mechanisms,
such as: turret heads, milling heads, turning sub spindles, lunettes,
ready parts catchers, workpiece loaders, device for tool tuning etc.

Turning operations
SprutCAM offers a wide variety of turning, boring, drilling strategies,
including: rough turning cycles, finishing cycles, grooving cycles, all
types of chasing cycles on cylindrical as well as conic surfaces, turning
of screw surfaces of any section with permanent and alternating step,
 holes machining cycles using tools from the leading manufacturers as well
as specialized tool made in house. In order to achieve an optimal machining
 of parts using B axis, the user is given a convenient mechanism of control
of the cutter tilting angle relative to the part’s surface.

Milling operations
All types of rough and finish milling used with regular milling machines are supported.
SprutCAM permits to create NC programs using C and Y axis for machining
with the main spindle as well as with the sub spindle, in the outer diameter
 of the part as well as on its end surface. If the machine is equipped with
B axis, then the index milling machining of the part is supported in tilted
planes, as well as the simultaneous 5 axis machining using all the machine’s axes.

 SprutCAM has 5 axis continuous strategies, which enables to create
 CLData for any type of multiaxis machines. The CLData is created
taking into consideration the machine scheme, which permits to avoid
collisions during the machining. The CLData is created taking into
consideration the transformation of the co-ordinates of the machining.

We're extremely excited to announce the official release of new version
SprutCAM 11. It had presented March 20th - 21th in Frankfurt and available right
This is a major version release with hundreds of new features, enhancements,
 and improvements: 5D Surfacing operation, Helical operation, Rotary
roughing operation, Pencil operation, Corners cleanup operation, Toolholder
collision avoidance, Dynamic approach / return move editing and more!

Turn-Mill module of SprutCAM includes powerful turn-milling methods to
 program multi axial machining with support Multi-tasking Turn-Milling
centers with live tooling, include CNC Swiss-Type Lathe. Easy interface
 and features of the lathe module the ability to program roughing,
 finishing, grooving, threading and part-off machining operations.
Control of all the machine mechanisms

SprutCAM permits to create NC programs for any types of turn mill machines
without a limitation on the number of axes and machine’s executive mechanisms,
such as: turret heads, milling heads, turning sub spindles, lunettes,
ready parts catchers, workpiece loaders, device for tool tuning etc.

Turning operations
SprutCAM offers a wide variety of turning, boring, drilling strategies,
including: rough turning cycles, finishing cycles, grooving cycles, all
types of chasing cycles on cylindrical as well as conic surfaces, turning
of screw surfaces of any section with permanent and alternating step,
 holes machining cycles using tools from the leading manufacturers as well
as specialized tool made in house. In order to achieve an optimal machining
 of parts using B axis, the user is given a convenient mechanism of control
of the cutter tilting angle relative to the part’s surface.

Milling operations
All types of rough and finish milling used with regular milling machines are supported.
SprutCAM permits to create NC programs using C and Y axis for machining
with the main spindle as well as with the sub spindle, in the outer diameter
 of the part as well as on its end surface. If the machine is equipped with
B axis, then the index milling machining of the part is supported in tilted
planes, as well as the simultaneous 5 axis machining using all the machine’s axes.

Sprutcam11.5 for win7/8/10 X86X64 2018 release! welcome to trial version have test it first!!

Welcome to few days license file to test
pls contact me: globalrobotsolutions#gmail.com
replace # to @

download links:
https://mega.nz/#F!eJwxFCLR!y1BiXdzAo8dvpE4TDz39sQ



 SprutCAM has 5 axis continuous strategies, which enables to create
 CLData for any type of multiaxis machines. The CLData is created
taking into consideration the machine scheme, which permits to avoid
collisions during the machining. The CLData is created taking into
consideration the transformation of the co-ordinates of the machining.

We're extremely excited to announce the official release of new version
SprutCAM 11. It had presented March 20th - 21th in Frankfurt and available right
This is a major version release with hundreds of new features, enhancements,
 and improvements: 5D Surfacing operation, Helical operation, Rotary
roughing operation, Pencil operation, Corners cleanup operation, Toolholder
collision avoidance, Dynamic approach / return move editing and more!

Turn-Mill module of SprutCAM includes powerful turn-milling methods to
 program multi axial machining with support Multi-tasking Turn-Milling
centers with live tooling, include CNC Swiss-Type Lathe. Easy interface
 and features of the lathe module the ability to program roughing,
 finishing, grooving, threading and part-off machining operations.
Control of all the machine mechanisms

SprutCAM permits to create NC programs for any types of turn mill machines
without a limitation on the number of axes and machine’s executive mechanisms,
such as: turret heads, milling heads, turning sub spindles, lunettes,
ready parts catchers, workpiece loaders, device for tool tuning etc.

Turning operations
SprutCAM offers a wide variety of turning, boring, drilling strategies,
including: rough turning cycles, finishing cycles, grooving cycles, all
types of chasing cycles on cylindrical as well as conic surfaces, turning
of screw surfaces of any section with permanent and alternating step,
 holes machining cycles using tools from the leading manufacturers as well
as specialized tool made in house. In order to achieve an optimal machining
 of parts using B axis, the user is given a convenient mechanism of control
of the cutter tilting angle relative to the part’s surface.

Milling operations
All types of rough and finish milling used with regular milling machines are supported.
SprutCAM permits to create NC programs using C and Y axis for machining
with the main spindle as well as with the sub spindle, in the outer diameter
 of the part as well as on its end surface. If the machine is equipped with
B axis, then the index milling machining of the part is supported in tilted
planes, as well as the simultaneous 5 axis machining using all the machine’s axes.

Sprutcam11.5 for win7/8/10 X86X64 2018 release! welcome to trial version have test it first!!

Welcome to few days license file to test
pls contact me: globalrobotsolutions#gmail.com
replace # to @

download links

https://mega.nz/folder/kBwgDYTK#JUetkhqEe7wBdTaNWuVZjg

or

 
part1 http://j.gs/E0AZ
part2 http://j.gs/E0Aa
part3 http://j.gs/E0Ab
part4 http://j.gs/E0Ac
part5 http://j.gs/E0Ad
part6 http://j.gs/E0Ae
part7 http://j.gs/E0Af
part8 http://j.gs/E0Ag



 SprutCAM has 5 axis continuous strategies, which enables to create
 CLData for any type of multiaxis machines. The CLData is created
taking into consideration the machine scheme, which permits to avoid
collisions during the machining. The CLData is created taking into
consideration the transformation of the co-ordinates of the machining.

We're extremely excited to announce the official release of new version
SprutCAM 11. It had presented March 20th - 21th in Frankfurt and available right
This is a major version release with hundreds of new features, enhancements,
 and improvements: 5D Surfacing operation, Helical operation, Rotary
roughing operation, Pencil operation, Corners cleanup operation, Toolholder
collision avoidance, Dynamic approach / return move editing and more!

Turn-Mill module of SprutCAM includes powerful turn-milling methods to
 program multi axial machining with support Multi-tasking Turn-Milling
centers with live tooling, include CNC Swiss-Type Lathe. Easy interface
 and features of the lathe module the ability to program roughing,
 finishing, grooving, threading and part-off machining operations.
Control of all the machine mechanisms

SprutCAM permits to create NC programs for any types of turn mill machines
without a limitation on the number of axes and machine’s executive mechanisms,
such as: turret heads, milling heads, turning sub spindles, lunettes,
ready parts catchers, workpiece loaders, device for tool tuning etc.

Turning operations
SprutCAM offers a wide variety of turning, boring, drilling strategies,
including: rough turning cycles, finishing cycles, grooving cycles, all
types of chasing cycles on cylindrical as well as conic surfaces, turning
of screw surfaces of any section with permanent and alternating step,
 holes machining cycles using tools from the leading manufacturers as well
as specialized tool made in house. In order to achieve an optimal machining
 of parts using B axis, the user is given a convenient mechanism of control
of the cutter tilting angle relative to the part’s surface.

Milling operations
All types of rough and finish milling used with regular milling machines are supported.
SprutCAM permits to create NC programs using C and Y axis for machining
with the main spindle as well as with the sub spindle, in the outer diameter
 of the part as well as on its end surface. If the machine is equipped with
B axis, then the index milling machining of the part is supported in tilted
planes, as well as the simultaneous 5 axis machining using all the machine’s axes.